To get the longest runtime say 40mins flight, your going to needĪnd a big battery, when i say big i mean big like 10,000 to 15,000 mah not your small 4000mah Our craft weighs 1.5kg so we have enough power to punch out (climb at rapid speed ) Now when we use half throttle our craft produces around 1.5-1.8kg thrust and the machine hovers, at full throttle it produces 3.2kg thrust Lets say a 600kv motor produces 800gr of thrust so all four motors produce 3200gr thrust ( just over 3kg) Your motors will be rated for props, a good motor will tend to give you a table with prop size rpm speed and how much lift in grams that prop and motor will produce. This means we will produce the same lifting power as the 8-9 inch props, but at a slower speed of rotation, slower motor speed means less power used, less power used means longer flight time. So the prop size now jumps up, you go from like 8-9 inch props and have 11-12 inch props ( think a jet wing its short n needs speed - a glider is long wing and produces lift at lower speed ) Lower kv means we now produce more torque and not speed, and more torque means we can throw a bigger longer prop. Note: the current sensor accepts XT60 battery plugs.Bigger prop say 11 - 12 inch if possible.Small size, 27mm x 47mm x12mm, only 15.6 grams.Software upgradable and configurable (Windows required).Supports 1W VTX with only minor airflow.Extremely low ripple and low RF noise, two stage filtered and shielded casing.Telemetry audio downlink or video input and mono audio pass-through (available via later software-update).OSD with GPS, battery voltage, current consumption, signal strength, callsign and timer display.Dual 2S to 6S input voltage – additional input for backup (2S only).All cables are shielded, further reducing the complexity of wiring and ensuring a noise-free video feed. The simplified wiring reduces points of failure and lets you focus on flying instead of tinkering. Suitable for any airplane and multirotor of any size. It makes FPV setups super-easy and is a safety feature every FPV aircraft should have. In a nutshell, the TBS CORE PNP PRO is a light-weight OSD and filtered power supply, feeding the pilot camera and video transmitter, all in one compact package. Should your main battery or ESC die, the secondary battery port can power your FPV system AND your model aircraft for a gentle descent with running video system (for airplanes only!) Coupled with the new GPS module, the OSD will help you navigate and estimate distances, speed, and heading. No more throttle loss due to over depleted batteries, flying at the edge of control signal, or forgetting to charge spare FPV system batteries. The built-in OSD provides vital information of the state of the aircraft. The TBS CORE PRO takes it to the next level, with GPS/compass capability and a digital, high accuracy current sensor, making this the most advanced OSD system available. The TBS CORE PNP line has been very popular among the FPV crowd for its ease of use and quick installation, as well as compatibility with a wide variety of video transmitters, FPV cameras and input voltages (2S to 6S). GOPRO HERO 5/6/7/8/9-SESSION 4/5 ND FILTERS/REPLACEMENT LENSįinally the OSD that can do it all, simple to install, plug and play.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |